Tulsa Iphone repair : Flex Cables
iPhone 5C LCD_Digitizer Screen Replacement (Full Version).mp3
Tulsa Iphone repair Welcome to phone doctors tutorial videos in this video we’ll show you step by step how to repair the iPhone 5 see LCT digitizer no small parts hard version on a scale from 1 to 10. This repair difficulty is rated a 7. The estimated time for this repair is twenty five minutes. You’ll need the following tools to complete this repair.
Don’t forget with the original screw that you will never lose a screw again. Screw that is available for most popular Android and Apple devices for all your DIY kits. Screw mats and repair tool needs. Visit us at doctors dot com. Use Coupon Code. IPhone 5 see 110 and received 10 percent off your entire purchase. You can also find and visit us on all the popular social networks. Now let’s get started on the repair. Step one. Ensure your device is powered down. Step 2 remove the two bottom screws with the pencil lobes screwdriver. Step three keep the glass of your device is shattered severely. It’s best to use a suction cup to pull up the screen. If the digitizer is badly shattered it’s best to use the metal Spud’s your tool. Be careful not to scratch or dent the housing when prying up the LCD. Step for. Remove the 4 LCD screws with the double zero Phillips screwdriver.
This is so you can unplug the LCD digitizer flex cables.
Then remove the LCD digitizer step 5. Unplug the 3 LCD digitizer flex cables from the board.
Tulsa Iphone repair Step 6. Remove the two Phillips screws to remove the home button flex. Carefully remove the flex contact pad with the plastic pry tool then remove the physical home button from the housing. Step 7. Remove the two Philips screws from the proximity shield.
Then remove the shield. Step 8. Remove the speaker. Step 9 remove the flex safety tape.
Then remove the proximity front camera flex with your plastic pry tool. Step 10 remove the six Philipe screws to remove the LCD shield from the LCD frame.
We hope our video tutorials helps you out. Don’t forget to subscribe to our channel for more tutorial and tech videos. Thanks again for watching.
Tulsa Iphone repair Step 11. Insert LCD protective shield back on the LCD frame and insert all six Phillips screws.
Step 12 the Insert the proximity front camera flex back into the LCD frame make sure it’s securely inserted for your proximity sensor will not work. Step 13. Align speaker back into place. Step 14.
The proximity shield needs a little bending to fit on the LCD frame.
Now is the time to do. A line.
Shield and insert the two Phillips screws. Step 15.
Tulsa Iphone repair Insert the physical home button into the housing and align the home button flex. Align the home button shield and insert the two Phillips screws. Step 16. Plug all three LCD digitizer connectors back onto the board. Align the shield and insert all four Phillips screws. Step 17. Snap LCD digitizer back into the housing securely make sure everything is flush with the housing. Step 18 insert the two Pantalone screws back into the bottom of housing. We hope our video tutorial is helped you out.
Don’t forget to subscribe to our channel for more tutorial and tech videos. Thanks again for watching
iPhone 5C Ringer Speaker Replacement.mp3
Tulsa Iphone repair Welcome to phone doctors tutorial videos in this video will show you step by step how to repair the iPhone 5 see ringer speaker on a scale from 1 to 10. This repair difficulty is rated a 5. The estimated time for this repair is 20 minutes. You will need the following tools to complete this repair.
Get with the original screw that you will never lose a screw again screw that is available for most popular Android and Apple devices for all your DIY kits. Screw mats and repair tool needs. Visit us at phone doctors dot com. Use Coupon Code. IPhone 5 see 110 and receive 10 percent off your entire purchase. You can also find and visit us on all the popular social networks. Now let’s get started on the repair. Step one. Ensure your device is powered down. Step 2 remove the two bottom screws with the Penta lobe screwdriver. Step three. If the glass of your device is shattered severely it’s best to use a suction cup to pull up the screen. If the digitizer is badly shattered it’s best to use the metal spongier tool. Be careful not to scratch or dent the housing when prying up the LCD. Step. For. Remove the four LCD screws with the double zero Phillips screwdriver.
This is so you can unplug the LCD digitizer flex cables.
Tulsa Iphone repair Then remove the LCD digitizer shield. Step 5 unplug the 3 LCD digitizer flex cables from the board. Step 6 remove the two Phillips screws to remove the battery shield and to unplug the battery flex cable.
Unplug the battery flaks.
The adhesive is very strong on the 5 C battery so pry up very gently and try not to puncture the battery. Be very cautious. A punctured battery can burn you or start a fire. Step 7. Unplug the charging port Gluck’s cable and antenna connector. Step 9.
Remove Phillips screw the ring or speaker and pry up the ground connector and home button contact prongs.
Step Eight. Remove the ringer speaker.
Step 10. Insert the ringer speaker with the ground connection on top of it.
Then insert the two Phillips screws into place.
And plug the antenna connector and charging port flex cable back on the board. Set the home button connection prongs back into place. Step 11.
The insert battery and plug in the battery flex connector back to board.
Align the battery shield and insert the two Phillips screws. Step 12. Plug all three LCD digitizer connectors back onto the board. Align the shield and insert all four Philips screws. Step 13. Snap LCD digitizer back into the housing securely. Make sure everything is flush with the housing step 14 insert the 2 Pantalone screws back into the bottom of housing. We hope our video tutorials helps you out. Don’t forget to subscribe to our channel for more tutorial and tech videos. Thanks again for watching