Tulsa cell phone repair : Best Repair
How to_ Samsung Galaxy S5 Screen replacement.mp3
Tulsa cell phone repair To. Phone doctor’s tutorial videos in this video we’ll show you step by step how to repair the Samsung Galaxy S5 full tear down on a scale from 1 to 10. This repair difficulty is rated a 9. The estimated time for this repair is 40 minutes. You will need the following tools to complete this repair. Don’t forget with the original screw that you will never lose a screw again screw that is available for most popular Android and Apple devices for all your DIY kits. Screw mats and repair tool needs. Visit us at phone doctors dot com. Use Coupon Code Galaxy S5 and received 10 percent off your entire purchase. You can also find it visit us on all the popular social networks. Let’s get started on the repair. Step one. Ensure your device is powered down. Step to. Remove the battery cover battery SIM card and SD card. Step Three. Remove three screws with Phillips screwdriver Brumback housing. Step Four. Remove home button flex shield and unplug home button flex connector. Step 5. In order to get to any components in the housing. You must remove the LCD digitizer off the midbrain housing.
Apply heat evenly.
Try not to apply too much heat to one area or the plastic housing or home but. When removing LCD digitizer take extreme caution when pry up on non-broken LCD digitizer and take you to.
Tulsa cell phone repair Unplug LCD flaks from midbrain with plastic pick.
Make sure you guide the home button flex out of the frame housing.
Step 6. Remove speaker shield then carefully move the flex contact pad with the plastic pry tool. Then remove the physical home button from the housing. Make sure to free up the home button Flack’s from the back of the LCD. Step 7.
Remove any excess adhesive or broken glass from inside housing.
Step 8.
Tulsa cell phone repair Remove the 10 screws from the midbrain screwdriver.
Step Nine.
Remove the midbrain from housing with metal pry tool.
Step 10. Remove this group from board with Philips screwdriver. Unplug antenna connector and charging port flex cable and remove the circuit board.
Step 11.
Remove rear camera from board. Remove the front camera from board.
Step 12.
Remove screw from charging port board with Phillips screwdriver. Then make sure front digitizers sensor flexes are free from the midbrain before pulling off the charging port. Caution sensor flexes are very thin and delicate and can easily rip. Pry up the charging port from the midbrain. Step 13. Remove the vibrator with metal pride tool.
Be cautious of the flex when pulling it off the midbrain. Free Assembly.
Step 14 insert a vibrator and make sure flex is aligned with midbrain pad.
Step 15. Place charging port on midbrain.
Make sure sensor flexes are aligned correctly. In.
Step 16. Plug in rear camera on board plug in front camera on board. Step 17. This plug in charging for connector circuit board.
Plug antenna connector back.
Inserts screw on board. Step 18. Insert mid-brain into back housing.
Insert 10 screws in midbrain.
Step 19. Apply 3M adhesive on the outer midbrain. Cut to appropriate sizes. Peel it remove all three remedies that cover.
Step 20.
Insert home button on digitizer and align flex cable. Sit your speaker shield on midbrain speaker slot.
Step 21.
Insert LCD digitizer on midbrain bottom first and feed home button flex through the mid frame.
And plug in LCD connector Tuborg.
Makes your digitizer is flush with Speaker shield. Apply light pressure on edges a digitizer to set the inside digitizer on it he.
Plug home button connector Tuborg. And clip back the home button flex Shia.
Insert 3 screw on back housing. Step 22.
Insert SIM card. SD card. Battery and back cover.
Power on device and test all functions of the phone.
This is the end of the repair video. We hope our video tutorial has helped you out. Don’t forget to subscribe to our channel for more tutorial videos. Thanks again for watching