Tulsa cell phone repair : Awesome Service
How to_ iPhone 5 Screen Repair Video – Easy Screen Version.mp3
Tulsa cell phone repair So this is the iPhone 5 LCD repair video coming to you straight from the doctors. Make sure you Subscribe to our YouTube channel Watch our brake test we have an awesome comparison between the iPhone 5 and the Samsung S3. You will love it. So let’s get right into this LCD repair. There’s really going to be two different versions on this repair.
We’re going to show you the quickest version that includes basically all the small parts it has the home button which is installed. It also has the ear speaker with proximity sensor flex all attached. OK. So we’re going to do the quick easy repair first and then we’ll show you the other version that doesn’t have the home button or the speaker proximity flex installed. That’s where you’d have to transplant everything from your broken one to the brand new one. So here we go. Let’s go ahead and we’ve already taken the two bottom screws out. They are located on either side of the charging connector will take those screws and put them to the side. Another really cool thing for I dive into this is we’re going to have our screw Matt developed today. This is an iPhone for us. And but it’s really cool because as you’re taking apart the whole iPhone it basically highlights all the screw locations and keeps you extremely organized so you don’t have 25 30 screws rolling off the table and you don’t know where they go because they’re all different sizes. So here we go. First thing we need we need to take the SIM card tray out go ahead and take your sim removal tool which is also provided from phone doctors to you and your DIY kits. Now we would use our pedalo screwdriver to take those two screws out.
It’s already done.
Tulsa cell phone repair But now what we want to do is to use our metal opening tool. This is also provided to you by phone doctors from the DIY kits that we sell. There is a seam between the aluminum middle frame and the LCD around the LCD there’s a small little fine plastic seam that we want to get in between the plastic same and the metal aluminum frame.
And we want to just pierce in there.
Siri can’t help us right now but it probably would be really smart if you can turn the device off on this one unfortunately I have no screen to turn it off and the digitizer is not functioning. So we’re just going to move ahead forward with this.
This is a whole lot different. This is kind of like returning back to the iPhone 3G 3G method and OK this is just phone right apart where the 3G 3G as it’s top down construction. And so you start with the LCD and it all starts opening from the top down. The iPhone 4 was backwards. You take the backplate off and move your way through all the way to the LCD.
Just go and turn that off. And we’re going to come up underneath here real quick turn around make sure that we lift that metal plate with it. So just like that. Now we’re going to fold it open just about right there and then we have a metal plate that you need to remove. Here real quick using the philips screwdriver you know my movies real quick.
The screws aren’t really magnetized but my driver is but it is important that you keep track of where your screws go that’s why it’s going to be really really advantageous for you to have a screw mat. Those can be ordered straight from Screw mat dot com or they come with foam doctors DIY kits that little shall come off. I’m going to go ahead and dump this over to get that other screw out. That was our top one.
All right over here OK. Now
we’re going to use our plastic phone opening tool so we’re not. Destroying anything and we want to be real careful. Just come up underneath the cable the the lip of it and we’re basically just going to kind of put it up just lightly. And this one off here there’s three cables. You have the LCD cable the digitizer cable and then the proximity cable that also controls your speaker. OK. So that’s that.
Now our camera is flipped up just a bit. Want to go ahead and push that back down into its little compartment.
Tulsa cell phone repair Take our LCD and we’re going to peel back these cables and get that third cable installed first you want to be real real gentle doing this. Make sure that you line it up correctly and then press it directly over that connector and you’ll feel it you know tighten up on it when it hits that spot. OK. Followed by the next one natural falls down and the last one here.
There we go. Now this little metal shield. It does have a couple of little sharp grooves here and we have cables over here so we want to be careful that we don’t mention the cables or whatnot but we just want to line it up over.
The. Holes so we thread the screws.
Nice and easy so nice that.
You don’t have to take everything out to replace the LCD on this iPhone 5.
Like the iPhone 4. So definitely save some time. I’m just being careful here because I don’t want to rip any cables. OK. That’s. Still not lined up. There we go that’s what we want right there.
OK.
Get our Philips screwdriver.
Some of these screws are. These are the only three screws in this that have been proven difficult with a good magnet.
Tulsa cell phone repair Magnetizing ability so get along here.
This kind of stuff happens to though where you just got to be patient.
And you’ll get it. Here we go.
Making sure that I hold open the LCD assembly so it doesn’t just fold all the way back and potentially rip those cables.
See. You just set it up there on the frame and slide it over. That’s the third time’s a charm here. That’s good.
Very important. I just taught myself there while pointing something out to you guys when I flipped it over a little piece of glass came out from the broken one before. So you’d want to make sure that you have a clean surface area before you put the new assembly down. So I’m really glad that happens.
So we do a a good job here. Oh my goodness.
Here we go see patients pays off now important we want to go ahead and plant the top make sure we get nice and flush against the scene at the top and then we’re just going to slowly fold it down into place. And make sure that there’s a little bit of resistance not much.
You just kind of popped and clicked in there.
Tulsa cell phone repair But be gentle and do it evenly OK. You don’t want to put a ton of pressure on one side and then potentially break this so this boy. But let’s go ahead and do a hard reset and we’ll get this sucker to come back to life.
The iPhone 5 quick version of the LCD replacement. Brought to you by phone doctors subscribe to our channel. Watch that break between the three and the iPhone 5.