Broken Arrow Iphone repair : Screen Repair

Broken Arrow Iphone repair Samsung Galaxy S3 Screen Repair Tutorial for Digitizer Replacement.mp3

See.

I this is some of the doctors today I’m going to show you how to do a Samsung Galaxy S3 digitizer LCD replacement before we get started I’ll show you the tools you’ll need to successfully make this repair first on the screen which has a touch screen and the LCD together you’ll need a full screwdriver a plastic pick and a metal pick.

To get started we’ll turn it over take off the battery door which unclipped at the top and then just clips then you take the battery up and then if you have some cards or memory cards make sure that to take those out as well.

If you get this back cover off or take out 10 philips screws are located here here here here here here here here here and here.

Broken Arrow Iphone repair Once we get the screws out just because over in a corner right there is no screws are out and they’re ready to take off his back plate is cut up into two portions the bottom portion and this top part where here are separate. I’ll show you the pick in between the white bezel and the silver or if it’s a black as three then. You come right back. Nothing really magical about this piece. It doesn’t have any speakers like the other dogs. Yes. Do you notice this piece right here. It’s still there. Get your Pasic prick and take off this fooks keep it right there.

So those are. Going to coat as you can see here the Rangers the head said Jack PLO’s right there.

That’s what you implied. So up to the side. And now we’re ready to take out the circuit board. There’s on one foot. There’s only one screw that holds the board in which is located here down here the charge for that black.

You know I just want to take that out off the side. There are multiple cables pulling on the circuit board. Right here is your LCD digitizer foce connector. You’re like Pasic pick underneath that.

You do not want to use the metal pick it. You can knock circuits office or imperative that you use the plastic pick it up here is another full scale plug. This is your front camera.

That’s right there.

Broken Arrow Iphone repair So once you have those cables undone you want to pull your antenna that the way and at that point you’re ready to hit the circuit board out come to this and there it is.

So since we get the circuit we’re taken out.

Now we’re ready to take off the glass and take the glass off you will need to use either a heat gun or a hairdryer to kind of melt the 3M and he said that holds the glass on and he can get that either at a hardware store or you may have a hairdryer at home or you could use.

And get it pretty hot. And you know right to hold it and get really hot.

Just take your pick.

You want to get in between the metal bezel and the screen is going to get underneath the.

Screen that will break your.

Separate and then glass like so. Now this does not have a faux cable like the other. The galaxy has to or some characters phones that have a usually a a flex down here at the bottom.

This one does not have that.

Because we’re here this is the LCD portion it’s difficult to come up again.

This is three and really good compared to the other scenes but just get on the.

Screen if you just and I don’t want to clean that up. There is no glass underneath you need to have the Glastonbury’s strings because it’s really easily break the next time in doing the repair.

The screens are.

All the stuff for here that I’m picking up her old and piece of that you you move on new and use of the old on the newsgroup.

So you have to worry about leaving this on.

You’ll just want to clean off the glass and get your finger in car or around make sure you get a little too fresh that could make it work as well. You know it’s going to wipe off a filling make sure that all the glass is off. When you know because of the way here before you. The new screen. All right. So we’re cleaned up there and the screen is 3M and so right here. So this will so this screen will stay down. Can pull that off.

And to push it there sticky everywhere.

You’ll want to feed the Fox cable through the frame so line up the home button and the speaker mesh.

Broken Arrow Iphone repair That’s that’s all lined up and hit your home. But make sure it’s pop and it’s not jammed. It should be pretty good to reassemble back together up the circuit board. And you don’t want to pull back the camera flex just kind of lay it back into place. So no work here and keep cutting underneath the circuit boards. You want to grab that out.

Put the cable back in or the LCD digitizer and your camera.

Or are things back into place. Put the box screw in hoping that the circuit court down here go the screen and you’ll see the fill of this for Paris.

It’s difficult for you or something you didn’t want to attempt. You can wasn’t made it into us.

Visit us from doctors dot com slash mail.

Or telescreens You can also go to our website from doctors dot com. I was trying to build on our Web site and plug in the head said Jack which plugs in snug.

And the folks capable of pulling into the circuit board are free put that in.

Before that don’t mean your intention is where we can get service.

Are there steps back in and that will put our shoes back in.

So we get the screws back in now insert the battery door and air power button here on the site.

And there it is. So long hair powering on and way for it to power on it. You can test the test out make sure things are working perfectly fine. If you like the video make sure to hit the light button on. But at the bottom of the page you also to a YouTube channel. You get all the the latest info emails on the latest videos. As far as the issue you see one X is coming out. I’ve had three video we’re working on and the new galaxies that are coming out here in the future.

Sledding is touching but it’s working. We’re good to go.

Broken Arrow Iphone repair That is how you successfully replace the Galaxy S3 digitizer and LCD replacement and I think we’re going to take a trip to Mars.