Broken Arrow cell phone repair : Effective

Broken Arrow cell phone repair Now. Were. On. All. Three sides. Well here is all this he says of this one side. Over and over like a foot. And this. Is. Ripping. Of the. The power. What’s. The most effective way that I know how to do it and do this method I have not just. Arafat’s.

It’s. Very very effective versus just jabbing in there and hope you’ll hit it. So what we’ll do here is just bring.

This.

All your life. And there it is.

Broken Arrow cell phone repair So let’s separate the glasses off you don’t want to gloss away because very important here you have a camera that will hold her which holds the camera basically in place to keep that and then your home button down here.

So we’ll pick that off. Here first the home button module that some gloss came off with that will clean that up here in a second.

And your metal camera frame.

It’s 3:00 a.m. So we’ll head to the new glass up to a point. There’s all glass. You can just throw away. You want anything else off that as you can see here. Also the power flexes here is the flexing of the quantity you don’t want to riff which controls the power button. Then you scroll down here and you have your your your volume key. Flex right there. And this is also attached to the power flex you know knocking the circuits off there. That’s why I pulled it over versus getting your pick and here in Canada di di diving in there very very dangerous and not one of those flexes and then you cause yourself your 45 minutes of work 30 days apart. So very very good ideas come into the fold over like I had done. I find it very very effective. Now since we’ve got the glass off what we’ll do is I’ll make sure that that will take the city out of the the device. There’s four screws located in each corner right here. Philips screwdriver and Ewell’s take those those those screws out and take the LCD here. The LCD digitizer is obviously a separate part. We also carry the LCD is if you end up melting the LCD or cracking it we do have those on our website as well.

Broken Arrow cell phone repair And so once we got the four screws out what I’ll do is I’ll take a metal pick and it’s got a middle frame here that the screws are holding it down with him and just kind of just pick up the LCD like that it is folded up and I pick up on the right side of the pad.

We put it like this. The home button would be done here a camera would be up top to pick up this side because the LCD is plugged in. Down here or the digitizer pillows and we’re all folded up like this always and we’re going to fold it up.

As you can see here the the feel is plugged in down here and it’s got a little tab that’s going to. That falls down. And so we’re into is we’re just going to pick it up from the side picking this up. Be extremely careful when you’re doing this do it from the side and not from here. The single because you can knock out circuits and cause the LCD not to display anymore.

So what you want to do is come from just from the right side and just kind of just pick up that as you can see here the lever lifts up at that point. The LCD is then removable and we will just kind of just.

Broken Arrow cell phone repair Push it out this way. Right there you go. And the LCD is now out.

We will put that to the side for the time being until we get back to it. So the LCD is out now. This right here is going to be your digitizer flex. And so we’ll take that out.

All it is has two little prong or plug ins here.

We’re going to flip up.

Broken Arrow cell phone repair That foot. And the secret the fooks just pulls out like that and then that’s how we get there. I awakened to use that again. So now we got these LCD and the digitizer removed from the device. And so now we’ll do is we’ll go and clean up all our trim areas that all the glass off because once we get that off that we can get them back on there. We don’t want any glass on the MID frame at all because they the glass replacements are so thin you don’t want to. You don’t want to have a better chance of breaking it again if you leave glass underneath there so stick your finger and kind of rubbing around. Find out where your glasses at.

Obviously the SEALs probably see glass on there and so it was kind of chip at it sometimes will come up easily if it doesn’t come up easily. You

can use a heat gun as well. Just be careful if you do it on the side of where the battery is at. You

know when I asked him if the battery is extremely careful when you’re doing this that you don’t want to jab off here kind of work your way out this way seed a way if you can avoid hitting anything of importance.

That three is going to be very very similar to disrepair so if you’ve got an iPad 3 are thinking about doing an iPad 3 screen replacement it’s very very similar. The only difference really is that they have a middle bracket that curves of these powerful boxes and that’s very very useful I think. And in doing the app has three digitizers that are out there a little bit easier. You don’t have to worry about breaking something which is very very nice.

Feeling around sure you get a glass of.

Broken Arrow cell phone repair Speaking of the iPad 3 video. We’ll have that coming up here shortly available on our Web site. So look for that. We do have the screen to believe available on our Web site so you can purchase the screen to the video link will be will be up here soon will be getting on that.

Shake all the glass out we’re going to.

Fool around make sure it’s not glass. I do it slowly. The whole thing. Don’t wait and think is cook cook yourself and go get it.

So. Now. We’re going to. Get our glass shards out of the way here.

I want to send her our Scrooges out of there.

Don’t recommend doing this out of your home.

I would recommend doing it like an outside or or table.

And stuff all the way home but has two different parts to it. It’s got the cosmetic piece obviously but you’re going to push. But it’s also got cleaned up right here which is the button actually pushes and it touches the prongs down here so it will touch the little grommets here.

And that’s what makes a home button.

So those are cleaned up. The office was off to the site here.

Quick all the glass shards of the words scrunch up or devise.

Already some of the some of the I-pads that I’ve done before. Sometimes you’ll have like Naks in the course here and so to do to fix that issue. What we’ve done or what you can do is you take your take your pick here and like a household hammer. So I go on here and you kind of you might have a friend hold it on this side right here and just kind of hold it in place and you kind of just knock out the quarter like that slightly sort of just kind of it goes back to kind of the way where it was and it looked really really nice. Now now like factory but it’ll it’ll look a lot better and that the screen will sit down blush. That’s the most important thing is to have that screen sit down flush. You don’t want it popping up like that.

Broken Arrow cell phone repair So now that we have all the plastic and outs and corners are looking good we will get the the new digitizer here and your should come with a piece of IF it does not come with that on the screen then you will be supplied with some separate 3 3 on tape and then you can put it all on the on the on the on the digitizer. So what will do is pull this back and give us a picture here and what we want to do is we want to set our get our home button and then the camera bracket put on the screen here before we attach it to the the head.

So you put this cosmic and first and this this down.

In place and then I’ll turn the cut around here real quick and I’ll push the button make sure it pops pops. We know it’s in good it’s it’s it’s in good shape and ready to install.

You know we’re going to attach the grammar and the camera back and positions us to some place take a.

First we’re. Going to tell you this whole thing here on the Flex can just come off. That’s no use. Put this in.

Put both sides in and it’s very important that you make sure these both clips are going down. So if you don’t have the screen work you this will not. So avoiding the frustration make sure those are both pointing down. And kind of just fit down in this little groove here that all the street down and so it just has to go to be able to be foot back or grab the city here and we’re going to plug this guy back in. It’s slides in there and we just flip it up put the brake. So it’s ready to go.

We’ll lay it down to place.

And we will now. Kurt Philips screws back in.

We’re almost done with this.

Broken Arrow cell phone repair Our series are back in. So now we are ready to take off our three and 3M adhesive and fill it up in only two down to four deep and you scratch the digitizer and make each cut it into where it doesn’t look very good when you put it together so slightly underneath this top layer the 3M.

All right. 3M is now off and ready to clean. Well make sure LCD is clean and the digitizer is clean so you don’t get dirt dust lent like that are the glass because I would be very very annoying.

So clean cleaned up there.

Sense to have the LCD and digitize or clean up. Now we can put the digitizer on now and we do this around bindis flexure So the screens need to sit down just perfectly fine. So will do is. Set the screen right there on the edge of the next thing that the black plastic on that surrounds the frame. And we’re just going to make sure it’s all the way up against it sit and flush. So we decided to sit down and it slides on us. So what’s it sitting down. We’ll make sure all the corners are good. That’s going to sit flush and that’s going to sit flush there. Basically have the digitizer to go. So now we can in home button and there it is on through to go.

Broken Arrow cell phone repair And that is it can get a phone come to order the screens. First time my name’s Tim and we’ll see it the next time for the iPad 3 digit other