Broken Arrow cell phone repair : Affordable

How to_ The iPhone 5C Complete Full Teardown_part_01.mp3

Broken Arrow cell phone repair Welcome to phone doctors tutorial videos in this video we’ll show you step by step how to repair the iPhone 5 see full tear down on a scale from 1 to 10. This repair difficulty is rated a 9. Estimated time for this repair is 45 minutes. You will need the following tools to complete this repair.

Don’t forget with the original screw that you will never lose a screw again screw that is available for most popular Android and Apple devices for all your DIY kits. Screw mats and repair tool needs. Visit us at phone doctors dot com. Use Coupon Code. IPhone 5 see 110 and receive 10 percent off your entire purchase. You could also find and visit us on all the popular social networks. Now let’s get started on the repair. Step one. Ensure your device is powered down. Step 2 remove the two bottom screws with the Penta lobe screwdriver. Step three. Keep the glass of your device is shattered severely it’s best to use a suction cup to pull up the screen. If the digitizer is badly shattered it’s best to use the metal Spud your tool. Be careful not to scratch or dent the housing when prying up the LCD. Step for. Remove the four LCD screws with a double zero Phillips screwdriver.

This is so you can unplug the LCD digitizer flex cables.

Then remove the LCD digitizer shield. Step 5 unplug the 3 LCD digitizer flex cables from the board.

Broken Arrow cell phone repair Step 6. Remove the two Phillips screws to remove the home button flex.

Carefully remove the flex contact pad with the plastic pry tool then remove the physical home button from the housing. Step 7.

Remove the two Philips screws from the proximity shield.

Then remove the shield. Step remove the speaker.

Step 9 remove the flex safety tape. Then remove the proximity front camera flex with your plastic pry tool. Step 10.

Remove the 6 Phillips screws to remove the LCD shield from the LCD frame.

Step 11. Remove the SIM card before going any further.

Step 12 remove the two Phillips screws to remove the battery shield and to unplug the battery flex cable.

Unplug the battery Flack’s. The adhesive is very strong on the 5 C battery so fry up very gently and try not to puncture the battery. Be very cautious. A punctured battery can burn you or start a fire.

Step 13.

Remove the two Phillips screws from the rear camera shield.

Remove the shield then remove the camera.

Step 14 unplug the charging port flex cable and antenna connector.

Remove Philips screw from the ringer speaker and pry up the ground connector and home button contact prongs.

Step 15. Remove the ringer speaker. Step 16. Remove the five philips screws then remove the ground connection. Then gently pry out the charging for.

Mike headset jack assembly. Steps 17.

Remove the vibrator shield by removing the two phillips screws.

Broken Arrow cell phone repair Remove the vibrator shield and the vibrator. Step 18. Remove the four special screws from the board with a flat head screwdriver.

Now remove all four philips screws.

Unplug the power volume keep locks and the Wi-Fi antenna connector. Caution. Be very careful when I’m plugging this antenna connector the connector has adhesive. So be careful prying it up. Remove.

Step 19 remove the upper MYF shield and remove the phillips screw.

Pry up on the Wi-Fi antenna to release it from the adhesive. Step 20.

Remove the five phillips screws and the screw washer to remove the power volume flex.

Once the screws are removed removed the ground connection. Next to the power button. Then gently pry up the flex cable and remove the physical power button. Step 21. Insert the physical power button with metal anchor point down. Align the power volume flaks on the existing adhesive pad.

Broken Arrow cell phone repair Screw in the three philips screws back into the vibrate switch and the volume keyframe starting with the vibrate switch first. Align the top ground connection before aligning the power button frame then align the power button flex and insert the two philips screws.

Step 20 to align the Wi-Fi antenna back in place and insert the Philipe screw.

Set the mike sheild back on the power flex.

Step 23. Plug the Wi-Fi antenna connector back on board before reassembling. Said board back into housing. Now plug in the power volume key flex connector. Screw the poor special screws and phillips screw back onto the board. Step 24 align the vibrator and vibrator housing back into the board. And screw in the two Phillips screws.

Step Twenty five.

Broken Arrow cell phone repair And insert the five philips screws. But not before lining the ground connection like cell.

Step 26. Insert the ringer speaker with the ground connection on top of it.

Then insert the two philips screws into place. And plug the antenna connector and charging port flex cable back on the board. Set the home button connection prongs back into place. Step 27. Insert rear camera back in a housing.

Aligned camera shield and insert the two Phillips screws.

Step 28 insert battery and plug in the battery flex connector back to Borth. Align the battery shield and insert the two Phillips screws. Step 29 insert the SIM card tray.

Step 30 insert LCD protective shield back on the LCD frame and insert all six philips screws. Step 31 insert the proximity front camera flaks back into the LCD frame make sure it’s securely inserted or your proximity sensor will not work. Step 32.

Align your speaker back into place.

Step 33. The proximity shield needs a little bending to fit on the LCD frame.

Now is the time to do so. And insert the two philips screws. Step 34. Insert the physical home button into the housing and align the home button flex. Align the home button shield and insert the two Phillips screws. Step 35. Plug all three LCD digitizer connectors back onto the board.

Align the shield and insert all four Phillips screws.

Broken Arrow cell phone repair Step Thirty six. Snap LCD digitizer back into the housing securely. Make sure everything is flush with the housing. Step 37 insert the 2 Penta lobe screws back into the bottom of housing.

This is the end of the repair video.